TYC 630840 Replacement Radiator Cooling Fan Motor for Honda CRV - Compatible with 2007-2011 Models | Perfect for Engine Overheating Prevention & Summer Driving

Installed the TYC 630840 radiator fan motor(replaced a Denso 263500-5510 12V, 12F motor), and my condenser fan motor 630910 (replaced a Denso 065000-2572 12V 1G 21) in my 2005 Honda CRV last night. I just unbolted the fan blade on both, then the motor from the plastic frame and bolted the new one in place. It was a perfect fit. Booth seem to run very smooth. I will update in 6 months or if there is any issue down the road. Best I can tell this is a decent quality part for much less than a new Denso would cost. This car has 211K and while I'm not positive, I suspect both motors I replaced are factory original. There are videos on youtube that show you how to do this without removing the radiator. That's what I did. Took my time and in total it took just over 2 hours. If you are actually replacing your fan motor/s on a 2005 Honda CRV keep in mind Honda designed this circuit to always operate both motors at the same time. They will never operate independently. Turning the AC on should activate both motors each time your compressor kicks in and/or when the coolant reaches a certain temperature (over 200F although there is debate just how high is OK. Mine doesn't kick in until 210 but since my AC is always on they are on anyway)they should both kick in.I actually verified this in the shop manual since it seems odd.