Replacement for FCC ID/Model 2AAZPFAN53T/FAN-53T, L3HFAN11T/FAN-11T, KUJCE9103/E08BT, CHQ7030T/UC7030T, L3HFAN35T1, L3HFAN35T or FAN-HD5.If your original remote operates on a different frequency, there is no way to replace it, even if they look the same
Replacement Ceiling Fan Remote This FAN-53T remote is not a universal remote. It does not include a receiver or 9V batteries and is a FAN-53T handheld remote control only. This remote does not have a reverse button. This remote control is for the FAN28R/FAN18R receiver (303.9MHz)
Solve the problem of the original remote control If the original remote control is lost, damaged or the buttons fail due to long time use, the replacement of the remote control can make the fan return to normal use, prolonging the service life of the fan and saving the cost of purchasing a new fan
Dimmer and Fan Speed Control This remote has 5 buttons, 3 speeds (high/medium/low), fan off and dimmer. The green button is for dimming, please note that this remote does not have a reverse or up/down button. The dimmer is compatible with incandescent bulbs and some dimmable LED lights. Most LED lamps and all CFL lamps are not dimmable, in which case the dimmer only supports the on/off function
Easy Installation Remove the battery cover and check the DIP switches inside the old remote control. Remove the battery cover and check the DIP switches inside the old remote control. The DIP switches are hidden behind the battery compartment as shown in the figure. Slide the switches on the new remote control to match the mode of the original remote control. After replacing the new remote control, everything works fine
