INTBUYING Centrifugal Medium Pressure Dust & Smoke Exhaust Blower Fan - Industrial Ventilation for Workshops, Factories & Smoke Extraction

Note:The two styles will be shipped randomly. The exhaust fan is typically used for mechanical equipment. Because when the laser machine is working, it can produce smoke or smell (smell different produced by different materials), so user need to use the exhaust fan to extract the smoke and smell out of room. Ensure a comfortable indoor environment.It is used for mechanical ventilation and dust removal of laser engraving machine, laser cutting machine, laser marking machine, woodworking dust removal and so on. Specification： Volt/Freq: 110V 60HZ Pressure: 1700PA Air Output Power: 550W Speed: 2800r/min Packing Size: 20.08"*12.20"*18.11" Gross Weight: 32lbs Notice: Installation Location: It should be in a place where the indoor environment is not disturbed by wind and rain. Ambient temperature: below 40 degrees Celsius Relative humidity: below 80% Air quality: If there are corrosive or flammable gases such as acid or alkali in the air, it should not be used. Ventilation and heat dissipation: Please choose to use in well-ventilated places, not in closed rooms or sealed boxes. Item Included(023216): 1*110V 550W Centrifugal medium pressure blower

It is used for mechanical ventilation and dust removal of laser engraving machine, laser cutting machine, laser marking machine, woodworking dust removal and so on.

Drawing lessons from honeycomb technology, the multilateral air intake adopts polygonal building structure, which has high compactness and durability.

The heat generated by the action of the rear integral heat sink fan can be dissipated by exhausting air to prolong its life.

The blower adopts copper motor and copper wire, which has the characteristics of large air volume and low noise.

Attention should be paid to avoid using in places with large amount of dust or fibre. If it is necessary to use in such places, please install filters and regularly clean up the dust attached to the filter and blower.